The molten hydrolytic reaction between sodium chloride and boron oxide at high temperature was studied. 研究了高温熔融状态下水蒸气与氯化钠、硼酐的水解反应。
Ni B alloy was prepared by electrical refining in induction furnace from waste Ni Al catalyst and boron oxide. 采用电炉冶炼含镍铝催化剂废料制备NiB合金,合金中的硼来源于硼酐。
Sulfur incorporation in diamond was performed by B-S co-doping method via microwave plasma chemical vapour deposition ( MPCVD) technique on undoped Si as substrates. Dimethyl disulfide and boron oxide were the doping sources, which were diluted in acetone. 利用微波等离子体化学气相沉积(MPCVD)技术,以丙酮为碳源,用二甲基二硫和三氧化二硼作掺杂源,在硅衬底上制备了硼与硫共掺杂的金刚石薄膜。
In this paper, the effect of suspension pH on adsorption of boron with hydrous zirconium oxide sorbent was studied. 研究了水合氧化锆吸附硼的pH效应。
Cation exchange SEPARATION-EMISSION Spectrographic Determination of boron in uranium metal or uranium oxide 阳离子交换分离-发射光谱法测定金属铀或八氧化三铀中微量硼
The antioxidation coating made from boron oxide with water and aluminium dihydrogen phosphate as binders was studied. 以水和磷酸二氢铝为粘结剂,对氧化硼作为电极防氧化涂层进行了研究。
A entirely set of method to separate and determine solid solution boron, carbon boride, alloy elements boride, boron oxide and boron nitride in low boron steel is established. 通过实验,建立了一整套低硼钢中固溶硼、碳硼化物、合金元素硼化物、氧化硼和氮化硼的分离、测定方法。
Vapor phase Beckmann rearrangement of cyclohexanone oxime on modified zirconia catalysts ⅲ. modification effect of boron oxide on zirconia 环己酮肟在改性氧化锆催化剂上的Beckmann重排反应Ⅲ.B2O3对ZrO2的改性效应
Synthesizing diamond with addictive boron oxide under HTHP 高温高压下用氧化硼添加剂合成金刚石
A study of adsorption of boron by zirconium hydrous oxide 水合氧化锆吸附硼的研究
Experimental and Theoretical Studies of Grinding Process of Boron Oxide 氧化硼研磨的实验与理论研究
Carminic Acide Spectrophotometric Method for the Determination of Boron Oxide in Ceramic Colours 、 Glazes and Glasses 胭脂红酸分光光度法测定陶瓷颜料、釉料和玻璃中的氧化硼
Study on boron oxide coated electrode 氧化硼作为电极涂层的研究
Effect of Boron Oxide on Iron Reduction in Magnesium Alloy 氧化硼除铁净化镁合金的研究
In the experiment, a certain proportion of boron oxide was added into graphite-Fe_ ( 70) Ni_ ( 30) powder system and mixed evenly to synthesize boron oxide dosing diamond on cubic hinge press under HTHP. 在实验中将一定比例的氧化硼添加到石墨-Fe70Ni30粉末体系中并混合均匀,在六面顶压机上利用高温高压合成掺氧化硼金刚石。
Transformation of boron oxide b_2o_3 under high pressure and high temperature 高温高压条件下三氧化二硼相变过程的研究
An industrial test report on E-glass fibres with low boron oxide content 低硼无碱玻璃纤维工业性试验报告
Effect of Boron Oxide on the Growth of Cubic Boron Nitride in Mg-BN System Mg-BN系中B2O3对立方氮化硼生长的影响
The thermal expand coefficient of modified borate glass system is suitable in SOFC, but the high percent boron oxide is disadvantage to the stability of sealing materials. 硼系玻璃获得了较高的热膨胀性能,但是氧化硼含量过高,对封接材料的化学稳定性不利。
Grinding of boron oxide particles by a planetary ball mill was studied both experimentally and theoretically. 用行星式球磨机对13个不同尺寸区间氧化硼的研磨过程进行了实验与理论研究。
Study on the Boron Oxide Carbothermal Reduction Synthesis of Boron Carbide 硼酐碳热法合成碳化硼的研究
The boron carbide pellets were manufactured using fine powder which is fabricated by carbon reducing boron oxide and then by air flow attrition. 用碳热还原法制取高化学剂量的B4C细粉,细粉经气流粉碎制得微米级B4C粉末。经致密化工艺得到碳化硼屏蔽吸收芯块。
The results showed that calcination temperature and addition of boron oxide affect its pore structure and activity. 结果表明,选择合适的焙烧温度,并用适量的B2O3改性后,能大大改善催化剂的孔结构参数;
Study on the Nanoscale Tribological Wear Properties of Boron Oxide by SFM 扫描力显微镜研究氧化硼摩擦磨损特性
Methods Aromatic aldehyde and 2, 4-pentanedione was used as the starting materials, which were dissolved in ethyl acetate in the presence of boron oxide and n-butylamine. The reaction was kept at 80 ℃ for 3 h. 方法分别用芳醛和2,4-戊二酮的硼化合物为原料在正丁胺的催化作用下,80℃反应3h,合成目标化合物;
Small amounts of boron were transferred from the electrode to weld metal by adding boron oxide or ferroboron powder to the electrode covering. 通过在焊条药皮中加入氧化硼或硼铁向焊缝渗入微量硼。
The results of AES analysis of the frictional surface indicated that the friction reducing agent decomposes to form a film containing boron oxide on the frictional surface to give the friction-reducing properties. 钢球磨痕表面的AES分析结果表明,有机硼化物减摩剂主要是通过在摩擦表面分解形成含硼的氧化物膜而起减摩作用。
In this study, aluminum powder was added into the aluminum oxide and boron oxide reactants as an additive in order to control the morphology of the final products. 本研究通过在氧化铝和氧化硼反应物中添加铝粉来控制最终产物的形貌。